CSS-88热室压铸机

射料部分：

二速射料控制,速度稳定,配合大流量插装阀,达到内压力损耗及反应时间差减至最低,安全可靠,提供高速和稳定性高的压射动作。射咀、射料炮、锤头、及料壹司筒采优质高温热作钢,耐磨及寿命特长。压射锤头配用日本或西德优质钢铃,能在高温高压高速下工作,保证压射力稳定。

Injection Unit

The Two -stage injection unit meet the highest casting

quality,and the accumulator is equipped with ahorizontal connection unit.The nozzle,plunger,gooseneckand melt pot are special durable.We used German or Japanmade piston rings plunger and Sweden made jet oil burnerto ensure safety operation.

油压系统：

所有油阀及各油缸密封件都采用进口名厂产品,可靠、耐磨、耐高温、高压及高速,寿命长。油压系统采用先进的比例压力和速度控制,特殊设计的操控系统,使机构运动更快捷、柔顺、稳定和安全可靠。直流24V控制,确保操作安全及稳定性提高。采用高性能、低噪音的高低压双泵或单泵以节省能源及提高生产效率

Hydaulic System

German or japanese made oil seals could enhance themachine the machine’s ability.the hydraulic system adoptsthe proportional value.DC24Vpower will make the operationmore safety and stable.The high-low pressure double pumpmakes lower lower noise lewel.

电器控制部分：

专业设计电脑程式控制器,可靠性高,寿命长操作方便,荧屏的故障监察功能可辅助迅速排除故障。所有动作及功能从屏幕显示,方便操作及检修。射咀,鹅头及熔炉采用闭环温度控制系统,使温度保持稳定可靠,避免射咀鹅劲温度不稳而产生次品。所有电气元件均采用日本及欧洲名厂商产品,确保整体品质的精良。特设控温棒熔穿警报装置,杜绝因超温引起的卡锤现象。

Electric Control Unit

We used programmable logic controller,it is optionalchoice of Screen display to satisfy the operation of die-cating.The controllers also contain Europen or japanesecomponents,they are including alarm light to avoidover heat and the pluner sticking

锁模部分：

尾板整体铸出,模板和机铰采用高强度球墨铸铁,坚固耐用。机铰采用双曲肘连杆扩力机构,整体机铰运动特性达到快速及稳定效果,全钢套机铰轴自由转动,杜绝单边磨损。油压驱动齿轮调模装置调节迅速,锁模稳定,并能保证锁模的精确度。倾斜的锁模机构,使产品更易脱落。中内润滑系统确保运动部件的润滑政党。

Clamping Unit

The platens and toggles are made of high strength S.G.lron,and the toggles are designed in double link type.The geartype mould could adjust for ensuring accurate and steady.The incline clamping makes the products release easier andassures longr life clamping.